送彩金的棋牌网站大白菜

Welcome to the official website of Dongguan Dongli Electromechanical Co., Ltd. ! Service Hotline: 0769-85153718
Your location: 送彩金的棋牌网站大白菜- > Information Center- > Inspection and maintenance of Jie parallel shaft helical gear reducer

Jie Brand Parallel Shaft Helical Gear Reducer Inspection and Maintenance


1. Oil level check

1. Cut off the power of Jiepa gear motor to prevent electric shock! Wait for the gearbox to cool down!

2. For the reducer with oil level plug: Unscrew the oil level plug, check the refueling height, and replenish the lubricant into the oil level plug if necessary.

Lubricant inspection

1. Cut off the power of the geared motor to prevent electric shock! Wait for the gearbox to cool down!

2. Unscrew the oil level screw plug and take out some sample oil.

3. Check the continuity of the lubricant.

粘度 4.Viscosity

如果润滑油看上去被污染,则建议立即更换润滑油。 5. If the lubricant appears to be contaminated, it is recommended to replace the lubricant immediately.

6. For a reducer equipped with an oil level plug, open the oil level plug, check the refueling height, replenish the lubricant if necessary, and screw in the oil level plug.

杰牌f系列平行轴斜齿轮减速机

Second, change the lubricant

Note: Please change the oil when the reducer has excess temperature.

Cut off the power of the geared motor to prevent electric shock! Wait for the gearbox to cool.

Tip: The lubricating oil in the reducer must still be warm, because the super-cooled high viscosity lubricating oil has poor fluidity and affects normal discharge.

1. Place the container under the oil drain plug.

2. Remove oil level plug, pressure reducing valve, oil drain plug and other plugs.

3. Drain the lubricant.

4. Screw in the drain plug.

5. Add the same type of new lubricant through the exhaust hole. No mixing of different lubricants is allowed.

-The refueling amount depends on the installation method or according to the nominal name on the nameplate.

-Check that the lubricant is in place.

6. Screw in the oil level screw plug.

7. Screw in the pressure reducing valve and other screw plugs.

Third, replace the oil seal

1. Cut off the power of Jiepa gear motor to prevent electric shock! Wait for the gearbox to cool.

2. When changing the oil seal, pay attention to ensure that there is a proper amount of grease between the lips of the oil seal.

1/3 的油脂。 3. If a double oil seal is used, the space between the two oil seals must be filled with about 1/3 of the space .

送彩金的棋牌网站大白菜 | Gear reducer | Worm reducer | Product customization | Common problem | Application case | Enterprise strength | News center | 送彩金的棋牌网站大白菜 | Contact
Dongguan Dongli Electromechanical Co., Ltd. All rights reserved @ Copyright Technical Support: Dongguan Website Construction [ BMAP ] [ GMAP ]
Service Hotline: 0769-85153718 Guangdong ICP 11027165 Fax: 0769-85701760
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours. [ Background Management ]
  • Back to top
  • 13924376581
  • 15078902059
  • Scan to add WeChat
  • Download Mobile APP